720 lt/day - 75 m³/day Stainless steel
Membrane filtration process for obtaining pure water, which is applied to waters where conventional treatment systems are insufficient (sea water, water with high conductivity, well water, etc.), separating all unwanted minerals in the water from the water, is called Reverse Osmosis. Osmosis is a natural phenomenon and in short, it is the passage of water from a less dense medium to a highly dense medium. This process continues until the osmotic balance is achieved. Reverse osmosis, on the other hand, is the reversal of this osmotic flow. Tetra Reverse Osmosis Systems successfully provide pure water as a result of this process. Tetra Reverse Osmosis Systems, on the other hand, can be produced according to different designs and designs according to customer requests.
STANDARD FEATURES
- Membrane covers FRP or Stainless steel
- TFC Spiral wound membranes 2,5” and 4” diameter
- SS304 stainless steel vertical centrifugal high pressure pump (in devices from BT 340 to BT1540)
- Brass body rotary type high pressure pump (in devices between BT 125/1 -BT 240)
- St-37 epoxy painted carbon steel chassis
- Cartridge filter with 5 micron precision
- Low and high pressure pipes U-PVC / Zonder
- automatic valves solenoid valve
- Pressure regulating valve in pump outlet and waste water line (in devices from BT 340 to BT1540)
- low pressure switch
- Product water and waste water scratch flow meters
- Glycerin manometers
- Product water conductivity indicator
- RO electronic control card
- 220 V/50Hz/1ph (in devices between BT 125/1 -BT 240)
- 380 V/50Hz/3ph (in devices between BT 340-BT1540)
- Antiscalant dosing system not included
ENTRANCE WATER LIMITS
- Inlet water TDS: 0 - 2,000 ppm
- Inlet water pressure: 2 to 5 bar
- Inlet water pH range: 6-8
- Silica (SiO2) Tolerance: Maximum 25 ppm
- Minimum and maximum inlet water temperature (10ºC - 30ºC)
- Maximum Iron (Fe) tolerance: 0.05 ppm, 0.2 ppm if ASC is dosed
- It should not be Hydrogen Sulfide.
- No turbidity (NTU <1)
- There should be no oil-grease
- SDI < 5
- No microbiological contamination
