150 m3/day to 1650 m3/day
Membrane filtration process for obtaining pure water, which is applied to waters where conventional treatment systems are insufficient (sea water, water with high conductivity, well water, etc.), separating all unwanted minerals in the water from the water, is called Reverse Osmosis. Osmosis is a natural phenomenon and in short, it is the passage of water from a less dense medium to a highly dense medium. This process continues until the osmotic balance is achieved. Reverse osmosis, on the other hand, is the reversal of this osmotic flow. Tetra Reverse Osmosis Systems successfully provide pure water as a result of this process. Tetra Reverse Osmosis Systems, on the other hand, can be produced according to different designs and designs according to customer requests.
STANDARD FEATURES
- Membrane sleeves FRP
- TFC Spiral wound membranes 8" diameter
- AISI304 or AISI316 quality stainless steel vertical centrifugal high pressure pump
- ST-37 Epoxy painted carbon steel or AISI304 Stainless steel chassis
- Cartridge with 5 Micron precision filter
- Low pressure line U-PVC PN16
- High pressure line AISI304 Stainless steel
- Login electric actuated butterfly valve
- Pressure regulating globe valves in pump outlet and waste water line
- Low and high pressure switch
- Product water and waste water flow meters
- Glycerin manometers
- Product water conductivity indicator (0-2000µS/cm)
- Product water pH meter (optional)
- Autoflush, automatic rinsing and chemical washing System
- On-Off switch
- PLC and operator panel
- 380V/50Hz/3ph
- IP56 control board
Recommended Intake Water Limits
Inlet water TDS : 0 - 2,000 ppm
Working pressure: Between 10 and 15 bar
Inlet water pressure: 2 to 5 bar
ASC dosage is required if the hardness is more than 3 French
pH range: 6 - 8
Silica (SiO2) Tolerance: 25 ppm max. @ 60% efficiency
Max. Inlet water temperature = 30º C Max.
Max Iron (Fe) tolerance: 0.05 ppm, 0.2 ppm if ASC is dosed
It should not be Hydrogen Sulfide.
There should be no turbidity ( NTU
